Deine Suche ergab leider keine Ergebnisse. Bitte ändere die zuletzt verwendeten Filter und versuche es erneut.
Anzeige
Angebote unserer Partner-Shops
"
Compact-flash
"
Filtern
Sortieren:
Beste Treffer
Beste Treffer
Preis: niedrig bis hoch
Preis: hoch bis niedrig
Ansicht:
MagBac USB C Docking Station 6-in-1 USB C Hub with 4K HDMI, 3 USB A 3.0 5Gbps, SD/TF Card Reader Slot, Aluminum Laptop Docking Station for MacBook, iPad, Dell, HP, Lenovo ASUS Laptops 8W-CXV5-FZKX
6-IN-1 USB C Hub: USB 3.0 hub has perfectly combined all the functions you need. This laptop docking station connect to your MacBook or full-featured Type C port Laptops, featuring 3 x USB A 3.0 Ports, 1 x HDMI ports, SD/ MicroSD Card Reader. USB multiport adapter allows you to connect a keyboard, USB flash driver to your USB-C devices. SuperSpeed Transmission:With high efficient 3*USB A 3.0, this USB hub multiple adapter provides 5 Gbps stable data transfer and is compatible with 2.0/1.0. It is fast enough to transfer an HD movie in seconds. Beautiful and practical: Made of aluminum alloy, with a 1cm ultra-thin body, sturdy, stylish and beautiful, with good heat dissipation. Even if all ports work at the same time, they will not generate serious heat. The distance between ports is designed reasonably and will not interfere with each other, making it more convenient for you to work. 4K HDMI Video Output: This usb c multiple adapter can stream 4K/2K/1080P to HDTV, Monitors or projectors via HDMI port, presenting you vivid HD stable video picture. USB C hub also support 3840x2160 4K@30Hz, 2560x1600 and lower resolutions at 60Hz. USB C multiport adapter is also downward compatible with 2K and 1080P. (Note:The host USB-C port on your device must support Display Port Alt Mode). Portable Laptop Docking Station: This usb c dock is plug-and-play, no drivers, setup or software required. Compact size, takes up very little space, perfect for carrying in your bag and on the go. If there is any question with our product, please feel free to tell us, we will reply you within 24 hours and give you the perfect solution.
Perixx PERIBOARD-534 US Kompakte USB-Tastatur mit Touchpad, X-Typ-Scherentasten, 39,7 x 19,8 x 3 cm, integrierte 2 USB-Hubs und Nummernblock PB-534US-12053
Compact Keyboard with Number Pad — Measuring 15.63 × 7.8 × 1.18 in and weighing 1.61 lb, this space-saving keyboard features an integrated numeric keypad ideal for data entry and number-intensive tasks on professional or industrial desktops. Built-In 2.48 × 1.85 Inch Touchpad — A laptop-style touchpad below the spacebar enables smooth cursor movement with intuitive finger control — perfect where desktop space or USB ports are too limited for a traditional mouse. Physical Mouse Buttons & Multi-Finger Gestures — Two integrated physical mouse buttons deliver satisfying click feedback for everyday navigation. Multi-finger gestures make scrolling and zooming quick and intuitive, just like your laptop touchpad. Dual USB 2.0 Hub Ports — Two built-in USB 2.0 ports on the back let you easily connect a mouse, flash drive, or other accessories to expand your workstation without needing extra hubs. Quiet Scissor-Switch Typing — X-type scissor keys with 2 mm key travel deliver smooth, responsive, and low-noise typing. Durable ABS construction makes this keyboard ideal for professional and shared workspaces. 12 Multimedia Function Keys with Fn Lock — Built-in multimedia keys provide quick access to audio, video, and system functions via Fn + F1–F12 hotkeys. The Fn Lock feature lets you switch modes effortlessly for uninterrupted workflow. 6 ft Cable & Plug-and-Play Setup — An extra-long 6 ft USB cable allows flexible desk placement and easy routing. No drivers required — simply plug into any desktop PC, laptop, or all-in-one and start typing immediately. Broad Windows Compatibility & 12-Month Warranty — Fully compatible with Windows 7, 8, 10, and 11. Includes keyboard and user manual. Backed by a 12-month limited warranty with RMA requests typically processed within 48–72 hours through the Perixx website.
Switch Allgemein Switch-Typ Managed Anzahl der basisschaltenden RJ-45 Ethernet Ports 24 Konsolen-Port RS-232 Vollduplex Ja MAC-Adressentabelle 10000 Eintragungen Management-Funktionen Switch-Typ Managed Design Stapelbar Ja Sicherheit CSA 22.2 No. 60950; EN 60950/IEC 60950; UL 60950 Elektromagnetische Verträglichkeit FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A Anschlüsse und Schnittstellen Anzahl der basisschaltenden RJ-45 Ethernet Ports 24 Konsolen-Port RS-232 Power over Ethernet (PoE) Power over Ethernet (PoE) Nein Datenübertragung MAC-Adressentabelle 10000 Eintragungen Durchgang up to 75,7 million pps (64-byte packets) Mpps Max. Datenübertragungsrate 1 Gbit/s Sonstige Funktionen Management-Plattform HP PCM+; HP PCM (included); command-line interface; Web browser; configuration menu Latenz 1000 Mb Latency: Abmessungen (BxTxH) 546,1 x 442,5 x 43,2 mm Übertragungstechnik Verkabelt Speicher und Prozessor : Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, packet buffer size: 36 MB QDR SDRAM total (18 MB for 1-GbE & 10-GbE ports), 256 MB compact flash, 256 MB DDR SDRAM Energiebedarf 100 -120 VAC / 200 -240 VAC; 50 /60 Hz. The switch automatically adjusts to any voltage between 100-120 and 200-240 volts and either 50 or 60 Hz Montage Telco rack: Mounts in an EIA-standard 19-in. 2-post telco rack or equipment cabinet; horizontal surface mounting only. Rack kit: Rack rails are required for mounting in HP 10000 Series 4-post racks. Remote-Management command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C) Eingangsfrequenz 50 / 60 Hz Eingangsspannung 100-120 / 200-240 VAC V Weitere Anschlüsse 20 auto-sensing 10/100/1000 ports(IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T), Media Type: Auto-MDIX, Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only; 4 dual-personality ports, each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers); 4 SFP+ 10-GbE ports, Duplex: full only; 1 RS-232C DB-9 console port Elektromagnetische Interferenzen FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A. Elektromagnetische Immunität EN 55024, CISPR 24; IEC 61000-4-2; IEC 61000-4-3; IEC 61000-4-4; IEC 61000-4-5; IEC 61000-4-6; IEC 61000-4-8; IEC 61000-4-11; EN 61000-3-2, IEC 61000-3-2; EN 61000-3-3, IEC 61000-3-3 Managementproduktname HP ProCurve Manager Plus; HP ProCurve Manager (included) Gewicht (imperial) 17,2 lb, Pfund Betriebshöhe über NN (Imperial) up to 10000 ft. Freie Steckplätze am Netzteil 2 Switch-Fabric-Geschwindigkeit 105.6 Gbps Leistung Energiequelle 1 x J9269A Stromverbrauch (Standardbetrieb) 204,3 W Leistungen Eingebauter Prozessor Ja Prozessor PowerPC MPC8540 Prozessortaktfrequenz 666 MHz RAM-Speicher 256 MB Flash-Speicher 256 MB Sicherheit DHCP-Funktionen DHCP client IGMP snooping Ja Betriebsbedingungen Temperaturbereich in Betrieb 41 - 104 °F Temperaturbereich bei Lagerung -40 - 70 °C Netzwerk Vollduplex Ja Unterstützung Datenflusssteuerung Ja Link Aggregation Ja Protokolle Unterstützte Netzwerkprotokolle RFC 1591 DNS (client); HTML and telnet management; IEEE 802.1ad Q-in-Q (Premium License); IEEE 802.1D MAC Bridges; IEEE 802.1p Priority; IEEE 802.1Q VLANs; IEEE 802.1s Multiple Spanning Trees; IEEE 802.1v VLAN classification by Protocol and Port; IEEE 802.1w Rapid Reconfiguration of Spanning Tree; IEEE 802.3ad Link Aggregation Control Protocol (LACP); IEEE 802.3x Flow Control; RFC 768 UDP; RFC 783 TFTP Protocol (revision 2); RFC 792 ICMP; RFC 793 TCP; UDLD (Uni-directional Link Detection); RFC 826 ARP; RFC 854 TELNET; RFC 868 Time Protocol; RFC 951 BOOTP; RFC 1058 RIPv1; RFC 1350 TFTP Protocol (revision 2); RFC 1519 CIDR; RFC 1542 BOOTP Extensions; RFC 2030 Simple Network Time Protocol (SNTP) v4; RFC 2131 DHCP; RFC 2453 RIPv2; RFC 2548 (MS-RAS-Vendor only); RFC 3046 DHCP Relay Agent
Waveshare ESP32-S3 1.75inch AMOLED Round Touch Display Development Board(Without Case & GPS), 32-Bit LX7 2-Core Processor, 466x466, QSPI Interface, Dual Digital Microphones Array, ESP32 with Display ESP32-S3-Touch-AMOLED-1.75
The ESP32-S3-Touch-AMOLED-1.75(Standard version) is a high-performance, highly integrated MCU board designed by Waveshare. It is compact in size, onboard 1.75inch AMOLED capacitive touch display, power management IC, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC chip, low power audio codec, echo cancellation circuit, and so on, which makes it easy for you to develop and integrate into the products quickly Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use. Onboard PWR and BOOT programmable buttons for easy custom function development Onboard 1.75inch AMOLED capacitive touch display for clear color picture display, 466x466 resolution, 16.7M color. Built-in CO5300 display driver and CST9217 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Equipped with dual digital microphones array for audio algorithms such as noise reduction and echo cancellation, suitable for accurate speech recognition and near-field / far-field voice wake-up applications Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip, powered by Li batt(NOT Included) through AXP2101 chip for uninterrupted power supply. Onboard 3.7V MX1.25 Li batt recharge/discharge header. Onboard 8PIN 2.54mm header adapting 3xGPIO and 1xUART, and reserved pads of I2C and 3xexpanded IO interfaces, for connecting peripherals and debugging Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design. Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, batt charging, batt management, and batt life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc
Waveshare ESP32-S3 1.75inch AMOLED Round Touch Display Development Board(with Case, No GPS), 32-Bit LX7 2-Core Processor, 466x466, QSPI Interface, Dual Digital Microphones Array, ESP32 with Display ESP32-S3-Touch-AMOLED-1.75-B
The ESP32-S3-Touch-AMOLED-1.75-B(Standard version with protective case) is a high-performance, highly integrated MCU board designed by Waveshare. It is compact in size, onboard 1.75inch AMOLED capacitive touch display, power management IC, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC chip, low power audio codec, echo cancellation circuit, and so on, which makes it easy for you to develop and integrate into the products quickly Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use. Onboard PWR and BOOT programmable buttons for easy custom function development Onboard 1.75inch AMOLED capacitive touch display for clear color picture display, 466x466 resolution, 16.7M color. Built-in CO5300 display driver and CST9217 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Equipped with dual digital microphones array for audio algorithms such as noise reduction and echo cancellation, suitable for accurate speech recognition and near-field / far-field voice wake-up applications Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip, powered by Li batt(NOT Included) through AXP2101 chip for uninterrupted power supply. Onboard 3.7V MX1.25 Li batt recharge/discharge header. Onboard 8PIN 2.54mm header adapting 3xGPIO and 1xUART, and reserved pads of I2C and 3xexpanded IO interfaces, for connecting peripherals and debugging Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design. Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, batt charging, batt management, and batt life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc
Waveshare ESP32-S3 1.75inch AMOLED Round Touch Display Development Board(GPS Version, No Case), 32-Bit LX7 2-Core Processor, 466x466, QSPI Interface, 2 Digital Microphones Array, ESP32 with Display ESP32-S3-Touch-AMOLED-1.75-G
The ESP32-S3-Touch-AMOLED-1.75-G(GPS version, with built-in LC76G module, comes with a GNSS ceramic antenna) is a high-performance, highly integrated MCU board designed by Waveshare. It is compact in size, onboard 1.75inch AMOLED capacitive touch display, power management IC, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC chip, low power audio codec, echo cancellation circuit, and so on, which makes it easy for you to develop and integrate into the products quickly Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use. Onboard PWR and BOOT programmable buttons for easy custom function development Onboard 1.75inch AMOLED capacitive touch display for clear color picture display, 466x466 resolution, 16.7M color. Built-in CO5300 display driver and CST9217 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Equipped with dual digital microphones array for audio algorithms such as noise reduction and echo cancellation, suitable for accurate speech recognition and near-field / far-field voice wake-up applications Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip, powered by Li batt(NOT Included) through AXP2101 chip for uninterrupted power supply. Onboard 3.7V MX1.25 Li batt recharge/discharge header. Onboard 8PIN 2.54mm header adapting 3xGPIO and 1xUART, and reserved pads of I2C and 3xexpanded IO interfaces, for connecting peripherals and debugging Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design. Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, batt charging, batt management, and batt life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc
AquaSphere – Spot LED plat pour piscine (W / RGB / RGB+RC) Le AquaSphère est un projecteur sous-marin plat qui améliore l'efficacité énergétique par rapport aux projecteurs halogènes traditionnels et est installé en surface sans niche. Cela fonctionne à 12 V CA grâce à un transformateur de sécurité et dispose d'une protection IPX8 / Classe III pour un travail immergé continu. Il est résistant aux agents chimiques typiques du traitement de l'eau et complètement compatible avec la chloration au sel . Livré avec accessoire de fixation valable pour piscines en béton et polyester . La gamme comprend la version blanc 5700K et deux modèles RVB . Dans la variante RVB + RC le télécommande est inclus (portée env. 2m ) et vous permet de contrôler jusqu'à 2 projecteurs avec le principal scénarios d'éclairage : Fondu 1 , Fondu 2 , lisse , Flash et sélection directe des couleurs ( Rouge, Violet, Vert, Cyan, Bleu, Blanc, Orange ) en plus de Désactivé . La version blanche ne comprend pas de télécommande. Recommandations d'installation et d'utilisation : le spot doit être installé complètement submergé , connecté au transformateur qui garantit le 12 V CA nécessaire à son fonctionnement. À titre de guide de projet, il est recommandé 1 projecteur par 15 m² de nappe d'eau dans des piscines de couleur claire avec une lumière blanche ; dans verres foncés ou en acier inoxydable et dans les installations RVB Il est conseillé de surdimensionner le nombre de projecteurs par m² pour garantir l'uniformité et le niveau d'éclairage. Sur le plan mécanique et électrique, l'ensemble est compact ( 280 × 11 × 280 mm , 1,4kg ) et est fourni avec Câble H07RN-F de 2,5 m et manuel d'installation. Une solution efficace, fiable et simple pour moderniser l'éclairage des piscines résidentielles ou communautaires avec une faible consommation et un entretien réduit. Caractéristiques W – Blanc (Réf. 74941) RVB (Réf. 71830) RVB + RC (Réf. 71744) Consommation / VA 11,5 W (18 VA) 15 W (23 VA) 15 W (23 VA) Flux lumineux 1 300 lm 900 lm 900 lm Couleur / T. couleur Blanc – 5 700 K RVB RVB télécommande Non inclus Non inclus Inclus (scènes et couleurs) Tension nominale 12 V CA Degré de protection IPX8 • Classe III Pose de piscine Hauteur recommandée 400–700 mm Dimensions 280 × 11 × 280 mm Poids 1,4kg Montage / Niche Surface (aucune niche requise) Garantie 2 ans Faites glisser le tableau pour voir toutes les données sur mobile.
BEYAMIS Mlx90640 2,8"-wärmebildkamera 320 X 240 Pixel Auflösung Temperaturbereich -40 °c Bis +300 °c 8 Hz Bildwiederholfrequenz Usb-c-ladefunktion Gebäude- Und Elektronikdiagnostik 211075194
MLX90640 Caméra thermique numérique LCD 2,8 pouces - Détection de température - Résolution 320 x 240 - Plage de mesure : -40 °C à +300 °C - Puce Flash SPI intégrée - Fréquence de rafraîchissement : 8 Hz - Chargement USB-C Description du produit : Cette caméra thermique multifonctionnelle portable est compacte et légère. Son écran TFT de 2,8 pouces permet une lecture rapide des données. Utilisable dans de nombreuses situations, elle est un outil indispensable pour un usage domestique et industriel. Mesure en temps réel dans une plage de -40 °C à +300 °C avec une fréquence de rafraîchissement dynamique de 8 Hz. Résolution d'écran de 2,8 pouces : 320 x 240 pixels. L'écran affiche et suit la température maximale, la température minimale et la température au centre. Le boîtier est fabriqué en résine époxy FR4 pour une meilleure protection des composants internes et une longue durée de vie. De petite taille, il est facile à transporter. Batterie lithium-ion intégrée, chargement USB-C ; jusqu'à 4 heures d'autonomie, utilisable pendant la charge. L'appareil photo dispose d'une fonction photo et nécessite un maintien du doigt pendant au moins 15 secondes. Puce Flash SPI intégrée, pouvant stocker jusqu'à 100 photos. Connectez-vous à un ordinateur ou un téléphone portable via un câble de données pour visualiser et copier les fichiers image. Conception tout-en-un, aucun appareil externe requis. Les caméras thermiques sont utilisées dans de nombreuses applications, notamment la mesure de température sans contact de haute précision et la détection de la température corporelle, la surveillance et le contrôle intelligents de la température ambiante dans les bâtiments, les contrôles de température des pièces automobiles pour la réparation et la maintenance, la surveillance et le contrôle de la température des fours à micro-ondes et des fours traditionnels, le suivi de la température des composants industriels, leur utilisation comme capteur de température visuel, la détection des fuites et la maintenance des équipements de chauffage au sol, ainsi que les inspections thermiques des circuits imprimés et des composants. Description : Cet appareil adopte une conception tout-en-un ; aucun appareil externe n'est requis pour fonctionner. Prise de photo : Appuyez une fois sur le bouton photo/réinitialisation pour enregistrer l'image actuelle lorsque l'appareil est allumé. Visualisation ou copie d'image : Après connexion à un ordinateur via un câble USB-C, appuyez une fois sur le bouton de changement de mode pour passer en mode clé USB et lire ou copier l'image. Réinitialisation : L'appareil peut stocker 99 images. Appuyez longuement sur le bouton photo/réinitialisation et relâchez-le lorsque l'écran clignote. L'appareil sera réinitialisé pendant environ 15 secondes pour restaurer son état initial. Remarque : L'appareil est alimenté par des piles au lithium de 3,7 V. Il est recommandé de maintenir le niveau de la batterie à environ 50 % avant une période d'inutilisation prolongée. Applications : Mesure de température sans contact de haute précision Sécurité et détection d'intrusion Détection de la température corporelle Mesure et contrôle intelligents de la température ambiante des bâtiments Contrôle de la climatisation automobile Détection et contrôle de la température des fours à micro-ondes et des fours à micro-ondes Surveillance de la température des pièces industrielles Capteurs de température visuels Détection et maintenance des fuites latérales des équipements de chauffage au sol Détection thermique des circuits imprimés et des composants Spécifications : Matériaux : plaque en résine époxy + circuit imprimé Capteur infrarouge : MLX90640ESF-BAB Résolution matérielle : matrice infrarouge lointain de 32 × 24 pixels Résolution d’écran : 320 × 240 pixels Plage de mesure de température : -40 °C à 300 °C Précision de mesure : ±2 °C Température de fonctionnement : 0 à 50 °C Humidité de fonctionnement : ≤ 70 % Fréquence de rafraîchissement : 8 Hz Fréquen