Kompatible Modelle: W163 W203 R170 ML / SLK / CLK / C CLASS OEM-Teilenummern: A0025429418, A0025429418Q01 Packliste: 1* Drehratensensor ESP Sensor Hohe Qualität: Unsere Yaw Turn Rate Module sind aus hochwertigen Materialien gefertigt, langlebig und von ausgezeichneter Qualität Einfache Installation: Einfach und schnell zu installieren, schnell zu verwenden

Produktdetails Kabellänge [mm]: 771 Einbautiefe [mm]: 28 Pol-Anzahl: 2 Einbauseite: Vorderachse Kabellänge: 771 mmEinbautiefe: 28 mmAnzahl der Steckkontakte: 2 -polig

Produktdetails Herstellereinschränkung: DENSO Einbauseite: Vorderachse Herstellereinschränkung: DENSO

'Produktdetails Kabellänge [mm]:940 Einbautiefe [mm]:20,9 Pol-Anzahl:2 Einbauseite:Vorderachse' Herstellereinschränkung: DENSOKabellänge: 940 mmEinbautiefe: 20,9 mmAnzahl der Steckkontakte: 2 -polig

Produktdetails Kabellänge [mm]: 1000 Einbautiefe [mm]: 30,3 Einbauseite: Vorderachse Kabellänge: 1000 mmEinbautiefe: 30,3 mm

Produktdetails Kabellänge [mm]: 875 Einbautiefe [mm]: 37,3 Einbauseite: Hinterachse Kabellänge: 875 mmEinbautiefe: 37,3 mm

ESP32-S3-Touch-AMOLED-2.41-B, with case, better protection. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PStatic RAM. Onboard UART and I2C SH1.0 4PIN connectors, with a reserved 34PIN 2.54mm pitch GPIO header for expandability Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with an onboard antenna. The device allows switching to an external antenna by resoldering an onboard resistor. Supports capacitive touch function, controlled via I2C interface, with interrupt support Onboard 2.41inch AMOLED display, QSPI interface, 600 450 resolution, 16.7M color. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for motion gesture detection, step counting, and more Onboard PCF85063 RTC chip with a reserved SH1.0 RTC batt header (supports charging) for RTC functionality. Onboard RST button, along with programmable BOOT and PWR buttons for customizable functionality and flexible development Onboard 3.7V MX1.25 Lithium batt recharge/discharge header. Onboard TF card slot, enabling external storage for pictures or files.Onboard USB Type-C port for power supply, program downloading, and debugging, making development more convenient

Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use Onboard 1.8inch AMOLED display for clear color picture display, 368 x 448 resolution, 16.7M color. Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Onboard PWR and BOOT programmable buttons for easy custom function development Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip, powered by main Lithium batt through AXP2101 chip, with reserved RTC batt pads for connecting a backup batt, ensuring RTC function during the replacement of the main batt. Onboard 3.7V MX1.25 Lithium batt recharge/discharge header, Support 3.7V Lithium batt(NOT Included) Reserved pads of 7 x GPIO, 1 x I2C, 1 x UART, and 1 x USB interface, for connecting peripherals and debugging. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, batt charging, batt management, and batt life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc

Robótica con ESP32: Del Sensor al Movimiento

Produktdetails Kabellänge [mm]: 1000 Einbautiefe [mm]: 28 Einbauseite: Vorderachse Kabellänge: 1000 mmEinbautiefe: 28 mm

Robótica con ESP32: Del Sensor al Movimiento

Produktdetails Kabellänge [mm]: 750 Einbautiefe [mm]: 19,5 Einbauseite: Vorderachse Kabellänge: 750 mmEinbautiefe: 19,5 mm

Adopts ESP32-S3FH4R2 chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 512KB SRAM, 384KB ROM, 2MB PSRAM, 4MB Flash memory Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance. Type-C connector, easier to use. Onboard QMI8658C attitude sensor. Onboard 8 × 8 RGB LED matrix for colorful lighting display Adapting Dout pin for extending RGB matrix. 17 × multi-function GPIO pins. Rich peripheral interfaces for achieving various functions flexibly Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenarios

Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with an onboard antenna. Supports switching to use external antenna via resoldering an onboard resistor Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Supports capacitive touch function controlled via I2C interface, with interrupt support. Onboard TF card slot for external TF card storage of pictures or files Onboard 1.43inch AMOLED display, QSPI interface, 466 x 466 resolution, 16.7M color. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc. Onboard PCF85063 RTC chip with reserved SH1.0 RTC batt header (supports charging) for RTC function requirement. Onboard RST button and programmable BOOT button for easy custom function development. Onboard 3.7V MX1.25 Lithium batt recharge/discharge header Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use. Onboard UART and I2C SH1.0 4PIN connector, reserved 2 x 14PIN 1.27mm pitch headers, adapting multiple GPIO interfaces.

ESP32-S3-Touch-AMOLED-2.41, standard version, without case. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PStatic RAM. Onboard UART and I2C SH1.0 4PIN connectors, with a reserved 34PIN 2.54mm pitch GPIO header for expandability Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with an onboard antenna. The device allows switching to an external antenna by resoldering an onboard resistor. Supports capacitive touch function, controlled via I2C interface, with interrupt support Onboard 2.41inch AMOLED display, QSPI interface, 600 450 resolution, 16.7M color. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for motion gesture detection, step counting, and more Onboard PCF85063 RTC chip with a reserved SH1.0 RTC batt header (supports charging) for RTC functionality. Onboard RST button, along with programmable BOOT and PWR buttons for customizable functionality and flexible development Onboard 3.7V MX1.25 Lithium batt recharge/discharge header. Onboard TF card slot, enabling external storage for pictures or files.Onboard USB Type-C port for power supply, program downloading, and debugging, making development more convenient

ESP32-S3-LCD-1.85 is a microcontroller development board with 2.4GHz WiFi and BT BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 1.85inch LCD display which can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency.Onboard audio decoder, Microphone, QMI8658 6-axis sensor, RTC sensor, TF card slot and batt recharge management module, etc Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Adapting UART, I2C and some IO interfaces Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 1.85inch LCD display, 360×360 resolution, 262K color Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Type-C connector, keeps it up to date, easier to use. Onboard 1.69inch 240×280 pixels 262K display for clear color pictures Built-in ST7789V2 display driver chip, using SPI communication, effectively saving the IO resources. Reserved 12PIN header of 5 × GPIO, I2C, and UART interfaces, for connecting peripherals and debugging Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard 3.7V MX1.25 lithium batt recharge/discharge header. Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios Onboard PCF85063 RTC chip with reserved SH1.0 RTC batt header (supports charging) for RTC function requirement. Onboard RST, BOOT and a programmable PWM button for easy custom function development

Produktdetails Ergänzungsartikel/Ergänzende Info 2: ohne Kabel Einbauseite: Vorderachse rechts Ergänzungsartikel/Ergänzende Info 2ohne KabelMAPP-Code vorhandenundefined

There are several options for this item, this option is without Touch function and header Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with an onboard antenna. Supports switching to use external antenna via resoldering an onboard resistor Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 1.91inch AMOLED display, 240 × 536 resolution, 16.7M color Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc. Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use Onboard 3.7V MX1.25 lithium batt recharge/discharge header. Onboard TF card slot for external TF card storage of pictures or files

This Smart Car Kit is based on ESP32(Included) and designed for teens to learn to coding, IoT and robotics. It is fully compatible with Arduino IDE. Easy to Assemble and Build - Detailed tutorials(280+ Pages, 20 Lessons) and complete code are provided. The download link can be found on the card in the box (Paper tutorials are NOT available as the tutorials are updated frequently). Multiple Control Methods - Wireless remote control by IR remote control; Remote controlled by Android APP. Multiple Functions - Video Transmission; IR/Wi-Fi remote control; Obstacle Avoidance; Line Tracking; Light Tracing; OLED display; LED Dot Matrix Display; Extended WS2812 RGB LED light strip. Control Board with Charging - Adeept ESP32 Robot Expansion Board integrates an 8.4V battery charger, allowing you to directly charge the battery through the Type-C interface without an additional charger.