Sandfilteranlage Speed Clean Comfort 75 Jeder Pool benötigt eine leistungsstarke Filteranlage - das ist kristallklar. Eine Sandfilteranlage eignet sich besonders gut für Außenpools, da sie gröberen Schmutz besser aus dem Wasser entfernt. Dieses Modell besitzt einen praktischen Vorfilter, der Pumpe und Behälter schont. Per Hebelschaltung kann die gewünschte Funktion eingestellt werden. Dazu zählt etwa das Filtern, Rückspülen, Nachspülen, Entleeren uvm. Über das LED-Display lässt sich die inkludierte Zeitschaltuhr programmieren. Für den Betrieb wird eines der folgenden Filtermedien empfohlen (nicht im Lieferumfang enthalten): ca. 700 g Filter Balls ca. 25 kg Quarzfiltersand 0,7 - 1,2 mm Technische Details Umwälzleistung: 7.800 l/h bzw. 7,8 m3/h Max. Wasserinhalt des Pools: 40.000 l Anschluss: Ø 32 / 38 mm Netzspannung: 230 V Leistung: 550 W Geräuschpegel: ca. 70 db Förderhöhe: 10,00 m Geeignet für Wasser mit Salzgehalt: 5 g/l Pluspunkte im Überblick Selbstsaugende Filterpumpe mit Vorfilter Einfach zu bedienendes 7-Wege-Ventil Programmierbare Zeitschaltuhr Manometer zur Druckkontrolle

ALLGEMEINE BESCHREIBUNG Die Filteranlage Steinbach Comfort 75 hat eine Umwälzleistung von 8.000 l/h und ist für Pools bis ca. 40.000 l geeignet. Sie kann an handelsübliche Aufstellpools mit 32 mm oder 38 mm Schlauchanschluss angeschlossen werden. Spezialadapter für INTEX Schläuche sind im Lieferumfang enthalten. Die Anlage ist bis zu einer maximalen Wassertemperatur von 35 °C und einem Salzgehalt von bis zu 5 g/l salzwassergeeignet. TECHNISCHE DATEN Umwälzleistung: 8.000 l/h Pumpenleistung: 9.500 l/h Spannung: 220-240 V~ / 50 Hz Leistung: 550 W Maximale Wassertemperatur: 35 °C Salzwassergeeignet: bis 5 g/l Schlauchanschlüsse: 32 mm und 38 mm KOMPATIBILITÄT UND ZUBEHÖR Die Filteranlage ist kompatibel mit handelsüblichen Aufstellpools und enthält Spezialadapter für INTEX Schläuche. INSTALLATION Die Installation erfolgt über die Standardanschlüsse für Schwimmbadschläuche. Ein großer Vorfilter schützt die Pumpe vor groben Schmutzpartikeln. ANWENDUNG Die integrierte Zeitschaltuhr ermöglicht eine einfache Programmierung der Filterzeiten. Ein Manometer im 7-Wege-Ventil zeigt den Betriebsdruck und den Zustand des Filtermediums an. WEITERE INFORMATIONEN 7-Wege-Ventil für verschiedene Betriebsarten: Filtern, Rückspülen, Nachspülen, Entleeren, Zirkulieren, Winterstellung, Geschlossen Massiver Spannring für einfache Handhabung Große Kammer für einfachen Austausch des Filtersandes Filterballs als optionale Alternative zu Sand

Steinbach Sandfilteranlage Comfort 75 Speed Clean | 9,5 m³ Leistung

O Ring für Vorfilterdeckel von SPS Schwimmbad Filterpumpen (Ø ca. 77 x 2,7 mm) Dichtring für Vorfilter von Poolpumpe SPS 75/100 Dichtung für transparenten Vorfilterdeckel (zwischen Deckel und Pumpengehäuse) O-Ring (Ø ca. 77 mm) zu Vorfilterdeckel auch passend für Steinbach für Sandfilteranlage Speed Clean Comfort 50 und 75

Klarsichteinsatz -Vorfilterdeckel für SPS FilterpumpeVorfilterdeckel passend für SPS Filterpumpen mit Vorfilter (Ansaugseite am Vorfilter). Gewindeanschluss 1 1/2 Zoll Höhe ca 80 mm Durchmesser unten 85 mm Durchmesser oben ca 50 mm passend für SPS50, SPS75 und SPS100 auch passend für für Sandfilteranlage Speed Clean Comfort 50 und 75

Dieses System wird für eine umweltbewusste Desinfektion gegen Algen und Bakterien in Pools und Teichen verwendet. Die UV-Lampe verfügt über eine Leistung von 18 Watt, das Anschlusskabel (230 V) hat eine Länge von 6 lfm. Die Montage kann ohne Zubehör direkt bei Sandfilteranlagen der Serie Speed Clean Comfort 75/50 und Eco 30 verwendet werden. Bei anderen Filteranlagen kann die Montage mit dem als Ersatzteil erhältlichen Speedpart Container (040530) montiert werden.

Swimming Pools Poolzubehör Trampoline & Zubehör Boote & Bootsmotoren Garten & Terrasse Bürostühle Luft- & Gästebetten Wohnen Freizeit & Sport Tierzubehör Spiellandschaften Weitere Angebote Als Favorit speichern Close Shop-Kategorien Swimming Pools Poolzubehör Trampoline & Zubehör Boote & Bootsmotoren Garten & Terrasse Bürostühle Luft- & Gästebetten Wohnen Freizeit & Sport Tierzubehör Spiellandschaften Steinbach Comfort 75 Sandfilteranlage Speed Clean 9,5 m³ Artikelbeschreibung Die Filteranlage Steinbach Comfort 75 verfügt über eine Umwälzleistung von 8.000 l/h. Diese Filteranlage kann für Pools bis ca. 40.000 l Wasserinhalt eingesetzt und kann an alle handelsüblichen Aufstellpools mit einem 32 mm oder 38 mm Schlauchanschluss angeschlossen werden. Zusätzlich sind Spezialadapter im Lieferumfang enthalten, um auch INTEX Schläuche anschließen zu können. Die Filteranlage kann bis zu einer maximalen Wassertemperatur von 35 °C verwendet werden und ist salzwassergeeignet bis zu einem Salzgehalt von 5 g/l. Hochwertige

Swimming Pools Poolzubehör Trampoline & Zubehör Boote & Bootsmotoren Garten & Terrasse Luft- & Gästebetten Spiellandschaften Spielzeug Weitere Angebote Als Favorit speichern Close Shop-Kategorien Swimming Pools Poolzubehör Trampoline & Zubehör Boote & Bootsmotoren Garten & Terrasse Luft- & Gästebetten Spiellandschaften Spielzeug Steinbach Sandfilteranlage Comfort 50 Speed Clean | 8,5 m³ Leistung Artikelbeschreibung Die Steinbach Comfort 50 Sandfilteranlage verfügt über eine Umwälzleistung von 6.600 l/h. Diese Filteranlage kann für Pools bis ca. 33.000 l Wasserinhalt eingesetzt und kann an alle handelsüblichen Aufstellpools mit einem 32 mm oder 38 mm Schlauchanschluss angeschlossen werden. Die Filteranlage kann bis zu einer maximalen Wassertemperatur von 35 °C verwendet werden und ist salzwassergeeignet bis zu einem Salzgehalt von 5 g/l. Hochwertige Filterpumpe Weitere Details Die Poolpumpe ist das Kraftwerk des Poolkreislaufes. Diese Filterpumpe SPS 75-1 hat eine Umwälzleistung von 6.600 l/h und eine reine Pu

ALLGEMEINE BESCHREIBUNG Das Steinbach UV-Desinfektionssystem 18W Transparent ist eine moderne und umweltfreundliche Methode zur Poolwasserdesinfektion. Es eignet sich für alle handelsüblichen Filteranlagen und lässt sich unkompliziert in den Wasserkreislauf integrieren. Durch die UV-C-Strahlung werden Algen, Bakterien und Mikroorganismen wirksam abgetötet, ohne chemische Zusätze zu verwenden. Der Chemikalienverbrauch, wie z.B. Chlor, kann deutlich reduziert werden, was kostenschonend und besser für Haut, Augen und Umwelt ist. Das transparente Gehäuse erleichtert die visuelle Kontrolle und sorgt für maximale Benutzerfreundlichkeit. TECHNISCHE DATEN Leistung: 18 Watt Spannung: 230 V Kabellänge: 6 m Universell für alle Filteranlagen einsetzbar Effektive Reduzierung von Algen und Bakterien ohne Chemie Umweltfreundliche Wasserdesinfektion Chemieverbrauch deutlich reduziert Optionales Zubehör: Gehäuse für UV-System (Art.-Nr. 040530) Transparentes Design zur optischen Kontrolle KOMPATIBILITÄT UND ZUBEHÖR Die Montage kann ohne Zubehör direkt bei Sandfilteranlagen der Serie Speed Clean Comfort 50 und Comfort 75 sowie Eco 30 verwendet werden. Bei anderen Filteranlagen kann die UV-Lampe mit dem als Ersatzteil erhältlichen Speedpart Container (040530) montiert werden.

Allgemeine Beschreibung Das Grohe Grohtherm Unterputz-Duschset mit Thermostatmischer kombiniert eine 250-mm-Kopfbrause und eine Handbrause mit Wandhalterung in elegantem Chrom. Dieses Set vereint Ästhetik, Modernität und fortschrittliche Technologie, um Komfort und Stil in Ihr Badezimmer zu bringen. Technische daten Durchfluss B: 27 l/min Durchfluss C: 27 l/min Kopfbrause Maße: 250 x 250 mm Handbrause Durchfluss: 8 l/min Empfohlener Mindestdruck: 1,0 bar Einbautiefe des Unterputzkörpers: 75-105 mm Gewicht: 5 kg Höhe: 28,6 cm Breite: 25 cm Länge: 25 cm Kompatibilität und Zubehör Grohe Unterputz-Wannenbatterie, Chrom (24076000) Grohe Vitalio Comfort 250 1-strahlige Kopfbrause, Chrom (26695000) Grohe Rainshower® Brausearm 286 mm (28576000) Grohe EUPHORIA CUBE NEU - Stick Set Wandhalterung und 1-strahlige Handbrause (26405000) Grohe Rapido SmartBox Universal Unterputzkörper 1/2 (35600000) Installation Stabiler Einbaukörper mit zahlreichen Befestigungspunkten für die Montage an der Wand oder hinter einer Trennwand. Vormontierter Spülstopfen für eine einfache Installation. Anwendung Geeignet für Durchlauferhitzer. Die Kopfbrause bietet einen gleichmäßigen Wasserfluss dank GROHE DreamSpray Technologie. GROHE EcoJoy sorgt für einen reduzierten Wasserverbrauch ohne Komfortverlust. Weitere Informationen GROHE StarLight: Brillantes und langlebiges Chrom. GROHE Speed Clean: Kalkablagerungen lassen sich leicht entfernen. GROHE SafeStop Sicherheitsstopp bei 38 °C und optionaler Temperaturbegrenzer bei 43 °C.

Comfortable full body harness for work positioning and fall arrest / wide waist belt / SPEED buckles / EN 358 . EN 361 . EN 813 . EN 1497 super comfortable wide waist belt padding provides maximum comfort when working at height strength webbing on the waist belt is stitched in the way that at normal working situation the body weight is absorbed by the padding only reflective strap and printing on the waist belt and a reflective strap on the shoulder padding increase the visibility in dark working conditions (the black version of the harness is not equipped with the reflective elements) anatomic leg loops and waist belt are covered with strong PES fabric providing high abrasion resistance strap that connects the legs loops and shoulders at the back passes freely through the waist belt, which brings increased mobility SPEED buckles enable fluent and fast adjustment to fit a user's body narrowed padding and webbing on the shoulder straps in a neck area enhance comfortable work leg loops connection straps made from durable PES webbing for better abrasion resistance front and back attachment points for fall arrest according to EN 361 marked with additional "A" marking flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus front lower attachment point for descender placement or work positioning according to EN 813 2 side attachment points for work positioning according to EN 358 4 ergonomic braided gear loops with a bearing capacity of 5 kg heavier items up to 35 kg can be attached to the webbing on the waist belt additional loops on the waist belt and leg loops with a bearing capacity of 5 kg offer additional space for the gear and better gear organization wide elastic band at left shoulder strap for the gear attachment (e.g. transmitter) slots at the waist belt for PORTERtool holder to carry your industrial tools shoulder attachment points for confined space rescue according to EN 1497 chest ascender smart fixation system(using an additional maillon), works best with CAM CLEAN all steel components finished with E-coating for higher corrosion resistance WEIGHT: 2075 g [size M/L] COLOUR: black with yellow, black Norm: EN 358 Norm: EN 361 Norm: EN 813 Norm: EN 1497 SIZE_RANGE: S, M/L, XL HARNESS_SIZE_TABLE_DESCRIPTION: A (cm)|A (in)|B (cm)|B (in)|C (cm)| HARNESS_SIZE_S: 65-80|25-31|45-60|18-24|150-170| HARNESS_SIZE_ML: 75-100|29-39|50-75|19-29|160-180| HARNESS_SIZE_XL: 85-130|33-51|50-75|19-29|175-205|

Comfortable full body harness for work positioning and fall arrest / wide waist belt / SPEED buckles / EN 358 . EN 361 . EN 813 . EN 1497 super comfortable wide waist belt padding provides maximum comfort when working at height strength webbing on the waist belt is stitched in the way that at normal working situation the body weight is absorbed by the padding only reflective strap and printing on the waist belt and a reflective strap on the shoulder padding increase the visibility in dark working conditions (the black version of the harness is not equipped with the reflective elements) anatomic leg loops and waist belt are covered with strong PES fabric providing high abrasion resistance strap that connects the legs loops and shoulders at the back passes freely through the waist belt, which brings increased mobility SPEED buckles enable fluent and fast adjustment to fit a user's body narrowed padding and webbing on the shoulder straps in a neck area enhance comfortable work leg loops connection straps made from durable PES webbing for better abrasion resistance front and back attachment points for fall arrest according to EN 361 marked with additional "A" marking flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus front lower attachment point for descender placement or work positioning according to EN 813 2 side attachment points for work positioning according to EN 358 4 ergonomic braided gear loops with a bearing capacity of 5 kg heavier items up to 35 kg can be attached to the webbing on the waist belt additional loops on the waist belt and leg loops with a bearing capacity of 5 kg offer additional space for the gear and better gear organization wide elastic band at left shoulder strap for the gear attachment (e.g. transmitter) slots at the waist belt for PORTERtool holder to carry your industrial tools shoulder attachment points for confined space rescue according to EN 1497 chest ascender smart fixation system(using an additional maillon), works best with CAM CLEAN all steel components finished with E-coating for higher corrosion resistance WEIGHT: 2075 g [size M/L] COLOUR: black with yellow, black Norm: EN 358 Norm: EN 361 Norm: EN 813 Norm: EN 1497 SIZE_RANGE: S, M/L, XL HARNESS_SIZE_TABLE_DESCRIPTION: A (cm)|A (in)|B (cm)|B (in)|C (cm)| HARNESS_SIZE_S: 65-80|25-31|45-60|18-24|150-170| HARNESS_SIZE_ML: 75-100|29-39|50-75|19-29|160-180| HARNESS_SIZE_XL: 85-130|33-51|50-75|19-29|175-205|

Comfortable full body harness for work positioning and fall arrest / wide waist belt / SPEED buckles / EN 358 . EN 361 . EN 813 . EN 1497 super comfortable wide waist belt padding provides maximum comfort when working at height strength webbing on the waist belt is stitched in the way that at normal working situation the body weight is absorbed by the padding only reflective strap and printing on the waist belt and a reflective strap on the shoulder padding increase the visibility in dark working conditions (the black version of the harness is not equipped with the reflective elements) anatomic leg loops and waist belt are covered with strong PES fabric providing high abrasion resistance strap that connects the legs loops and shoulders at the back passes freely through the waist belt, which brings increased mobility SPEED buckles enable fluent and fast adjustment to fit a user's body narrowed padding and webbing on the shoulder straps in a neck area enhance comfortable work leg loops connection straps made from durable PES webbing for better abrasion resistance front and back attachment points for fall arrest according to EN 361 marked with additional "A" marking flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus front lower attachment point for descender placement or work positioning according to EN 813 2 side attachment points for work positioning according to EN 358 4 ergonomic braided gear loops with a bearing capacity of 5 kg heavier items up to 35 kg can be attached to the webbing on the waist belt additional loops on the waist belt and leg loops with a bearing capacity of 5 kg offer additional space for the gear and better gear organization wide elastic band at left shoulder strap for the gear attachment (e.g. transmitter) slots at the waist belt for PORTERtool holder to carry your industrial tools shoulder attachment points for confined space rescue according to EN 1497 chest ascender smart fixation system(using an additional maillon), works best with CAM CLEAN all steel components finished with E-coating for higher corrosion resistance WEIGHT: 2075 g [size M/L] COLOUR: black with yellow, black Norm: EN 358 Norm: EN 361 Norm: EN 813 Norm: EN 1497 SIZE_RANGE: S, M/L, XL HARNESS_SIZE_TABLE_DESCRIPTION: A (cm)|A (in)|B (cm)|B (in)|C (cm)| HARNESS_SIZE_S: 65-80|25-31|45-60|18-24|150-170| HARNESS_SIZE_ML: 75-100|29-39|50-75|19-29|160-180| HARNESS_SIZE_XL: 85-130|33-51|50-75|19-29|175-205|

Comfortable full body harness for work positioning and fall arrest / wide waist belt / SPEED buckles / EN 358 . EN 361 . EN 813 . EN 1497 super comfortable wide waist belt padding provides maximum comfort when working at height strength webbing on the waist belt is stitched in the way that at normal working situation the body weight is absorbed by the padding only reflective strap and printing on the waist belt and a reflective strap on the shoulder padding increase the visibility in dark working conditions (the black version of the harness is not equipped with the reflective elements) anatomic leg loops and waist belt are covered with strong PES fabric providing high abrasion resistance strap that connects the legs loops and shoulders at the back passes freely through the waist belt, which brings increased mobility SPEED buckles enable fluent and fast adjustment to fit a user's body narrowed padding and webbing on the shoulder straps in a neck area enhance comfortable work leg loops connection straps made from durable PES webbing for better abrasion resistance front and back attachment points for fall arrest according to EN 361 marked with additional "A" marking flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus front lower attachment point for descender placement or work positioning according to EN 813 2 side attachment points for work positioning according to EN 358 4 ergonomic braided gear loops with a bearing capacity of 5 kg heavier items up to 35 kg can be attached to the webbing on the waist belt additional loops on the waist belt and leg loops with a bearing capacity of 5 kg offer additional space for the gear and better gear organization wide elastic band at left shoulder strap for the gear attachment (e.g. transmitter) slots at the waist belt for PORTERtool holder to carry your industrial tools shoulder attachment points for confined space rescue according to EN 1497 chest ascender smart fixation system(using an additional maillon), works best with CAM CLEAN all steel components finished with E-coating for higher corrosion resistance WEIGHT: 2075 g [size M/L] COLOUR: black with yellow, black Norm: EN 358 Norm: EN 361 Norm: EN 813 Norm: EN 1497 SIZE_RANGE: S, M/L, XL HARNESS_SIZE_TABLE_DESCRIPTION: A (cm)|A (in)|B (cm)|B (in)|C (cm)| HARNESS_SIZE_S: 65-80|25-31|45-60|18-24|150-170| HARNESS_SIZE_ML: 75-100|29-39|50-75|19-29|160-180| HARNESS_SIZE_XL: 85-130|33-51|50-75|19-29|175-205|

Comfortable full body harness for work positioning and fall arrest / wide waist belt / SPEED buckles / EN 358 . EN 361 . EN 813 . EN 1497 super comfortable wide waist belt padding provides maximum comfort when working at height strength webbing on the waist belt is stitched in the way that at normal working situation the body weight is absorbed by the padding only reflective strap and printing on the waist belt and a reflective strap on the shoulder padding increase the visibility in dark working conditions (the black version of the harness is not equipped with the reflective elements) anatomic leg loops and waist belt are covered with strong PES fabric providing high abrasion resistance strap that connects the legs loops and shoulders at the back passes freely through the waist belt, which brings increased mobility SPEED buckles enable fluent and fast adjustment to fit a user's body narrowed padding and webbing on the shoulder straps in a neck area enhance comfortable work leg loops connection straps made from durable PES webbing for better abrasion resistance front and back attachment points for fall arrest according to EN 361 marked with additional "A" marking flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus front lower attachment point for descender placement or work positioning according to EN 813 2 side attachment points for work positioning according to EN 358 4 ergonomic braided gear loops with a bearing capacity of 5 kg heavier items up to 35 kg can be attached to the webbing on the waist belt additional loops on the waist belt and leg loops with a bearing capacity of 5 kg offer additional space for the gear and better gear organization wide elastic band at left shoulder strap for the gear attachment (e.g. transmitter) slots at the waist belt for PORTERtool holder to carry your industrial tools shoulder attachment points for confined space rescue according to EN 1497 chest ascender smart fixation system(using an additional maillon), works best with CAM CLEAN all steel components finished with E-coating for higher corrosion resistance WEIGHT: 2075 g [size M/L] COLOUR: black with yellow, black Norm: EN 358 Norm: EN 361 Norm: EN 813 Norm: EN 1497 SIZE_RANGE: S, M/L, XL HARNESS_SIZE_TABLE_DESCRIPTION: A (cm)|A (in)|B (cm)|B (in)|C (cm)| HARNESS_SIZE_S: 65-80|25-31|45-60|18-24|150-170| HARNESS_SIZE_ML: 75-100|29-39|50-75|19-29|160-180| HARNESS_SIZE_XL: 85-130|33-51|50-75|19-29|175-205|

Comfortable full body harness for rope access / wide waist belt / removable shoulders / SPEED buckles / EN 358 . EN 361 . EN 813 . EN 1497 shoulder straps can be totally removed and the harness can be used as a sit harness only super comfortable wide waist belt padding provides maximum comfort when working at height strength webbing on the waist belt is stitched in the way that at normal working situation the body weight is absorbed by the padding only reflective strap and printing on the waist belt and a reflective strap on the shoulder padding increase the visibility in dark working conditions (the black version of the harness is not equipped with the reflective elements) anatomic leg loops and waist belt are covered with strong PES fabric providing high abrasion resistance SPEED buckles enable fluent and fast adjustment to fit a user's body OXY triple lock carabiner used for connection of shoulder straps to the main point to increase the space for chest ascender attachment chest ascender smart fixation system with a plastic cover on the OXY carabiner increasing the durability of the webbing (works best with CAM CLEAN) shoulders straps and leg loops are independently adjustable narrowed padding and webbing on the shoulder straps in a neck area enhance comfortable work front and back attachment points for fall arrest according to EN 361 marked with additional "A" marking flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus front lower attachment point for descender placement or work positioning according to EN 813 2 side attachment points for work positioning according to EN 358 all steel components finished with E-coating for higher corrosion resistance 4 ergonomic braided gear loops with a bearing capacity of 5 kg heavier items up to 35 kg can be attached to the webbing on the waist belt additional loops on the waist belt and leg loops with a bearing capacity of 5 kg offer additional space for the gear and better gear organization wide elastic band at left shoulder strap for the gear attachment (e.g. transmitter) slots at the waist belt for PORTER tool holder to carry your industrial tools shoulder attachment points for confined space rescue according to EN 1497 identification and methodical label WEIGHT: 2415 g [size M/L] COLOUR: black with yellow, black Norm: EN 358 Norm: EN 361 Norm: EN 813 Norm: EN 1497 SIZE_RANGE: S, M/L, XL HARNESS_SIZE_TABLE_DESCRIPTION: A (cm)|A (in)|B (cm)|B (in)|C (cm) HARNESS_SIZE_S: 65-80|25-31|45-60|18-24|150-170 HARNESS_SIZE_ML: 75-100|29-39|50-75|20-29|160-180 HARNESS_SIZE_XL: 85-130|33-51|50-75|20-29|175-205

Comfortable full body harness for rope access / wide waist belt / removable shoulders / SPEED buckles / EN 358 . EN 361 . EN 813 . EN 1497 shoulder straps can be totally removed and the harness can be used as a sit harness only super comfortable wide waist belt padding provides maximum comfort when working at height strength webbing on the waist belt is stitched in the way that at normal working situation the body weight is absorbed by the padding only reflective strap and printing on the waist belt and a reflective strap on the shoulder padding increase the visibility in dark working conditions (the black version of the harness is not equipped with the reflective elements) anatomic leg loops and waist belt are covered with strong PES fabric providing high abrasion resistance SPEED buckles enable fluent and fast adjustment to fit a user's body OXY triple lock carabiner used for connection of shoulder straps to the main point to increase the space for chest ascender attachment chest ascender smart fixation system with a plastic cover on the OXY carabiner increasing the durability of the webbing (works best with CAM CLEAN) shoulders straps and leg loops are independently adjustable narrowed padding and webbing on the shoulder straps in a neck area enhance comfortable work front and back attachment points for fall arrest according to EN 361 marked with additional "A" marking flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus front lower attachment point for descender placement or work positioning according to EN 813 2 side attachment points for work positioning according to EN 358 all steel components finished with E-coating for higher corrosion resistance 4 ergonomic braided gear loops with a bearing capacity of 5 kg heavier items up to 35 kg can be attached to the webbing on the waist belt additional loops on the waist belt and leg loops with a bearing capacity of 5 kg offer additional space for the gear and better gear organization wide elastic band at left shoulder strap for the gear attachment (e.g. transmitter) slots at the waist belt for PORTER tool holder to carry your industrial tools shoulder attachment points for confined space rescue according to EN 1497 identification and methodical label WEIGHT: 2415 g [size M/L] COLOUR: black with yellow, black Norm: EN 358 Norm: EN 361 Norm: EN 813 Norm: EN 1497 SIZE_RANGE: S, M/L, XL HARNESS_SIZE_TABLE_DESCRIPTION: A (cm)|A (in)|B (cm)|B (in)|C (cm) HARNESS_SIZE_S: 65-80|25-31|45-60|18-24|150-170 HARNESS_SIZE_ML: 75-100|29-39|50-75|20-29|160-180 HARNESS_SIZE_XL: 85-130|33-51|50-75|20-29|175-205

Comfortable full body harness for rope access / wide waist belt / removable shoulders / SPEED buckles / EN 358 . EN 361 . EN 813 . EN 1497 shoulder straps can be totally removed and the harness can be used as a sit harness only super comfortable wide waist belt padding provides maximum comfort when working at height strength webbing on the waist belt is stitched in the way that at normal working situation the body weight is absorbed by the padding only reflective strap and printing on the waist belt and a reflective strap on the shoulder padding increase the visibility in dark working conditions (the black version of the harness is not equipped with the reflective elements) anatomic leg loops and waist belt are covered with strong PES fabric providing high abrasion resistance SPEED buckles enable fluent and fast adjustment to fit a user's body OXY triple lock carabiner used for connection of shoulder straps to the main point to increase the space for chest ascender attachment chest ascender smart fixation system with a plastic cover on the OXY carabiner increasing the durability of the webbing (works best with CAM CLEAN) shoulders straps and leg loops are independently adjustable narrowed padding and webbing on the shoulder straps in a neck area enhance comfortable work front and back attachment points for fall arrest according to EN 361 marked with additional "A" marking flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus front lower attachment point for descender placement or work positioning according to EN 813 2 side attachment points for work positioning according to EN 358 all steel components finished with E-coating for higher corrosion resistance 4 ergonomic braided gear loops with a bearing capacity of 5 kg heavier items up to 35 kg can be attached to the webbing on the waist belt additional loops on the waist belt and leg loops with a bearing capacity of 5 kg offer additional space for the gear and better gear organization wide elastic band at left shoulder strap for the gear attachment (e.g. transmitter) slots at the waist belt for PORTER tool holder to carry your industrial tools shoulder attachment points for confined space rescue according to EN 1497 identification and methodical label WEIGHT: 2415 g [size M/L] COLOUR: black with yellow, black Norm: EN 358 Norm: EN 361 Norm: EN 813 Norm: EN 1497 SIZE_RANGE: S, M/L, XL HARNESS_SIZE_TABLE_DESCRIPTION: A (cm)|A (in)|B (cm)|B (in)|C (cm) HARNESS_SIZE_S: 65-80|25-31|45-60|18-24|150-170 HARNESS_SIZE_ML: 75-100|29-39|50-75|20-29|160-180 HARNESS_SIZE_XL: 85-130|33-51|50-75|20-29|175-205

Comfortable full body harness for rope access / wide waist belt / removable shoulders / SPEED buckles / EN 358 . EN 361 . EN 813 . EN 1497 shoulder straps can be totally removed and the harness can be used as a sit harness only super comfortable wide waist belt padding provides maximum comfort when working at height strength webbing on the waist belt is stitched in the way that at normal working situation the body weight is absorbed by the padding only reflective strap and printing on the waist belt and a reflective strap on the shoulder padding increase the visibility in dark working conditions (the black version of the harness is not equipped with the reflective elements) anatomic leg loops and waist belt are covered with strong PES fabric providing high abrasion resistance SPEED buckles enable fluent and fast adjustment to fit a user's body OXY triple lock carabiner used for connection of shoulder straps to the main point to increase the space for chest ascender attachment chest ascender smart fixation system with a plastic cover on the OXY carabiner increasing the durability of the webbing (works best with CAM CLEAN) shoulders straps and leg loops are independently adjustable narrowed padding and webbing on the shoulder straps in a neck area enhance comfortable work front and back attachment points for fall arrest according to EN 361 marked with additional "A" marking flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus front lower attachment point for descender placement or work positioning according to EN 813 2 side attachment points for work positioning according to EN 358 all steel components finished with E-coating for higher corrosion resistance 4 ergonomic braided gear loops with a bearing capacity of 5 kg heavier items up to 35 kg can be attached to the webbing on the waist belt additional loops on the waist belt and leg loops with a bearing capacity of 5 kg offer additional space for the gear and better gear organization wide elastic band at left shoulder strap for the gear attachment (e.g. transmitter) slots at the waist belt for PORTER tool holder to carry your industrial tools shoulder attachment points for confined space rescue according to EN 1497 identification and methodical label WEIGHT: 2415 g [size M/L] COLOUR: black with yellow, black Norm: EN 358 Norm: EN 361 Norm: EN 813 Norm: EN 1497 SIZE_RANGE: S, M/L, XL HARNESS_SIZE_TABLE_DESCRIPTION: A (cm)|A (in)|B (cm)|B (in)|C (cm) HARNESS_SIZE_S: 65-80|25-31|45-60|18-24|150-170 HARNESS_SIZE_ML: 75-100|29-39|50-75|20-29|160-180 HARNESS_SIZE_XL: 85-130|33-51|50-75|20-29|175-205

Comfortable full body harness for rope access / wide waist belt / removable shoulders / SPEED buckles / EN 358 . EN 361 . EN 813 . EN 1497 shoulder straps can be totally removed and the harness can be used as a sit harness only super comfortable wide waist belt padding provides maximum comfort when working at height strength webbing on the waist belt is stitched in the way that at normal working situation the body weight is absorbed by the padding only reflective strap and printing on the waist belt and a reflective strap on the shoulder padding increase the visibility in dark working conditions (the black version of the harness is not equipped with the reflective elements) anatomic leg loops and waist belt are covered with strong PES fabric providing high abrasion resistance SPEED buckles enable fluent and fast adjustment to fit a user's body OXY triple lock carabiner used for connection of shoulder straps to the main point to increase the space for chest ascender attachment chest ascender smart fixation system with a plastic cover on the OXY carabiner increasing the durability of the webbing (works best with CAM CLEAN) shoulders straps and leg loops are independently adjustable narrowed padding and webbing on the shoulder straps in a neck area enhance comfortable work front and back attachment points for fall arrest according to EN 361 marked with additional "A" marking flat rear attachment point does not bear on users back when carrying backpack or breathing apparatus front lower attachment point for descender placement or work positioning according to EN 813 2 side attachment points for work positioning according to EN 358 all steel components finished with E-coating for higher corrosion resistance 4 ergonomic braided gear loops with a bearing capacity of 5 kg heavier items up to 35 kg can be attached to the webbing on the waist belt additional loops on the waist belt and leg loops with a bearing capacity of 5 kg offer additional space for the gear and better gear organization wide elastic band at left shoulder strap for the gear attachment (e.g. transmitter) slots at the waist belt for PORTER tool holder to carry your industrial tools shoulder attachment points for confined space rescue according to EN 1497 identification and methodical label WEIGHT: 2415 g [size M/L] COLOUR: black with yellow, black Norm: EN 358 Norm: EN 361 Norm: EN 813 Norm: EN 1497 SIZE_RANGE: S, M/L, XL HARNESS_SIZE_TABLE_DESCRIPTION: A (cm)|A (in)|B (cm)|B (in)|C (cm) HARNESS_SIZE_S: 65-80|25-31|45-60|18-24|150-170 HARNESS_SIZE_ML: 75-100|29-39|50-75|20-29|160-180 HARNESS_SIZE_XL: 85-130|33-51|50-75|20-29|175-205