The STM32F103x6 performance line family incorporates the high-performance ARMCortex-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 32 Kbytes and SRAM up to 10 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN. The devices operate from a 2.0 to 3.6 V power supply. They are available in both the -40 to +85 °C temperature range and the -40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications. The STM32F103x6 low-density performance line family includes devices in different package types. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family. These features make the STM32F103xx low-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs. Key Features ARM32-bit Cortex-M3 CPU Core -72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access -Single-cycle multiplication and hardware division Memories -16 or 32 Kbytes of Flash memory -6 or 10 Kbytes of SRAM Clock, reset and supply management -2.0 to 3.6 V application supply and I/Os -POR, PDR, and programmable voltage detector (PVD) -4-to-16 MHz crystal oscillator -Internal 8 MHz factory-trimmed RC -Internal 40 kHz RC -PLL for CPU clock -32 kHz oscillator for RTC with calibration Low-power -Sleep, Stop and Standby modes -VBAT supply for RTC and backup registers 2 x 12-bit, 1 µs A/D converters (up to 16 channels) -Conversion range: 0 to 3.6 V -Dual-sample and hold capability -Temperature sensor DMA -7-channel DMA controller -Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs Up to 51 fast I/O ports -26/37/51 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant Debug mode -Serial wire debug (SWD) & JTAG interfaces 6 timers -Two 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input -16-bit, motor control PWM timer with dead-time generation and emergency stop -2 watchdog timers (Independent and Window) -SysTick timer 24-bit downcounter 6 communication interfaces -Up to 1 x I2C interfaces (SMBus/PMBus) -2x USARTs (ISO 7816 interface, LIN, IrDA capability, modem control -1x SPIs (18 Mbit/s) -CAN interface (2.0B Active) -USB 2.0 full-speed interface CRC calculation unit, 96-bit unique ID Packages are ECOPACK

This satellite finder has a 4.3 inch high definition LCD screen and is fully compatible with DVB-S/S2/S2X. Live FTA digital picture and sound, hardware decoding H.264/H.265 (10 Bit). This satellite finder supports auto, blind, manual, NIT scan. Supports DISEQC 1.0/1.1/1.2, 0/22 kHz tone. Support AV output and AV input at the same time. Supports H-DMI output. Built-in speaker LNB short conservation. This satellite finder complies with the standard portable combination meter. The satellite signal finder is small in size, lightweight and very comfortable to carry. Sound for locking signal. Automatically calculate the angle of AZ, EL. This satellite finder has a built-in 7.4V/4000mAh lithium ion battery, normal work up to 4-6 hours. Support real-time power display, with low power reminder. The satellite finder is updated by software via the USB and WiFi network. This satellite finder is used to detect signal strength and quality. the satellite finder provides all the necessary functions for the installation and verification of digital satellite television service, antenna signal and cable signal for residential homes or multi-dwelling units.

The Baseus EnerFill FC31 is a compact and efficient power bank with a 10,000 mAh capacity and a 22.5 W output. Equipped with a USB-C port, a USB-A port, and two integrated cables (USB-C and Lightning), it can charge up to four devices simultaneously. The USB-C port and cable support both input and output, offering greater flexibility. A digital LED display allows you to check the charge level at any time, while a low-current mode enables the safe charging of accessories such as headphones or watches. Its compact size, compliance with aviation standards, and convenient carrying strap make it the perfect travel companion.

【Breite Kompatibilität】Dieses Ladegerät funktioniert nahtlos mit allen iPhone 16 Modellen (16/16 Pro/16 Pro Max/16 Plus) und iPhone 15 Lineup (15/15 Pro/15 Pro Max/15 Plus), Schnellladung über PD Technologie. 【Ultra-Fast Charging Speed】Mit 20 W Schnellladetechnologie wird es über 3 x Schnellladegeräte als 5 W Standard-Ladegeräte geliefert. Quickly powers up your devices—for example, charging an iPhone 15 from 0% to 50% in just 30 minutes - so you spend less time waiting and more time using your devices 【Sicherheit & Zuverlässigkeit】Eingebaute intelligente Chips mit mehreren Sicherheitsschutz, einschließlich Überspannung, Überstrom, Übertemperatur und Kurzschlussschutz. Verhindert effektiv Schäden während des Ladevorgangs, bietet Ihnen und Ihren Geräten 【Kompakt & tragbar】Entworfen mit einem sleek, miniaturisierten Struktur, die minimalen Platz bietet. Leicht und einfach zu transportieren, passt perfekt in Ihre Tasche oder Tasche für den täglichen Betrieb, Geschäftsreisen oder Outdoor-Aktivitäten – laden Sie Ihre Geräte anytime, anywhere 【What You Get】Includes 20W super fast charging and 2m USB C to C charging cable

The STM32F103x6 performance line family incorporates the high-performance ARMCortex-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 32 Kbytes and SRAM up to 10 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN. The devices operate from a 2.0 to 3.6 V power supply. They are available in both the -40 to +85 °C temperature range and the -40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications. The STM32F103x6 low-density performance line family includes devices in different package types. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family. These features make the STM32F103xx low-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs. Key Features ARM32-bit Cortex-M3 CPU Core -72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access -Single-cycle multiplication and hardware division Memories -16 or 32 Kbytes of Flash memory -6 or 10 Kbytes of SRAM Clock, reset and supply management -2.0 to 3.6 V application supply and I/Os -POR, PDR, and programmable voltage detector (PVD) -4-to-16 MHz crystal oscillator -Internal 8 MHz factory-trimmed RC -Internal 40 kHz RC -PLL for CPU clock -32 kHz oscillator for RTC with calibration Low-power -Sleep, Stop and Standby modes -VBAT supply for RTC and backup registers 2 x 12-bit, 1 µs A/D converters (up to 16 channels) -Conversion range: 0 to 3.6 V -Dual-sample and hold capability -Temperature sensor DMA -7-channel DMA controller -Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs Up to 51 fast I/O ports -26/37/51 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant Debug mode -Serial wire debug (SWD) & JTAG interfaces 6 timers -Two 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input -16-bit, motor control PWM timer with dead-time generation and emergency stop -2 watchdog timers (Independent and Window) -SysTick timer 24-bit downcounter 6 communication interfaces -Up to 1 x I2C interfaces (SMBus/PMBus) -2x USARTs (ISO 7816 interface, LIN, IrDA capability, modem control -1x SPIs (18 Mbit/s) -CAN interface (2.0B Active) -USB 2.0 full-speed interface CRC calculation unit, 96-bit unique ID Packages are ECOPACK

The STM32F103xx medium-density performance line family incorporates the high-performance ARMCortex-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN. The devices operate from a 2.0 to 3.6 V power supply. They are available in both the -40 to +85 °C temperature range and the -40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications. The STM32F103xx medium-density performance line family includes devices in six different package types: from 36 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family. These features make the STM32F103xx medium-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs. Key Features ARM32-bit Cortex-M3 CPU Core -72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access -Single-cycle multiplication and hardware division Memories -64 or 128 Kbytes of Flash memory -20 Kbytes of SRAM Clock, reset and supply management -2.0 to 3.6 V application supply and I/Os -POR, PDR, and programmable voltage detector (PVD) -4-to-16 MHz crystal oscillator -Internal 8 MHz factory-trimmed RC -Internal 40 kHz RC -PLL for CPU clock -32 kHz oscillator for RTC with calibration Low-power -Sleep, Stop and Standby modes -VBAT supply for RTC and backup registers 2 x 12-bit, 1 µs A/D converters (up to 16 channels) -Conversion range: 0 to 3.6 V -Dual-sample and hold capability -Temperature sensor DMA -7-channel DMA controller -Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs Up to 80 fast I/O ports -26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant Debug mode -Serial wire debug (SWD) & JTAG interfaces 7 timers -Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input -16-bit, motor control PWM timer with dead-time generation and emergency stop -2 watchdog timers (Independent and Window) -SysTick timer 24-bit downcounter Up to 9 communication interfaces -Up to 2 x I2C interfaces (SMBus/PMBus) -Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control -Up to 2 SPIs (18 Mbit/s) -CAN interface (2.0B Active) -USB 2.0 full-speed interface CRC calculation unit, 96-bit unique ID Packages are ECOPACK

The STM32F103xx medium-density performance line family incorporates the high-performance ARMCortex-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN. The devices operate from a 2.0 to 3.6 V power supply. They are available in both the -40 to +85 °C temperature range and the -40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications. The STM32F103xx medium-density performance line family includes devices in six different package types: from 36 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family. These features make the STM32F103xx medium-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs. Key Features ARM32-bit Cortex-M3 CPU Core -72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access -Single-cycle multiplication and hardware division Memories -64 or 128 Kbytes of Flash memory -20 Kbytes of SRAM Clock, reset and supply management -2.0 to 3.6 V application supply and I/Os -POR, PDR, and programmable voltage detector (PVD) -4-to-16 MHz crystal oscillator -Internal 8 MHz factory-trimmed RC -Internal 40 kHz RC -PLL for CPU clock -32 kHz oscillator for RTC with calibration Low-power -Sleep, Stop and Standby modes -VBAT supply for RTC and backup registers 2 x 12-bit, 1 µs A/D converters (up to 16 channels) -Conversion range: 0 to 3.6 V -Dual-sample and hold capability -Temperature sensor DMA -7-channel DMA controller -Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs Up to 80 fast I/O ports -26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant Debug mode -Serial wire debug (SWD) & JTAG interfaces 7 timers -Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input -16-bit, motor control PWM timer with dead-time generation and emergency stop -2 watchdog timers (Independent and Window) -SysTick timer 24-bit downcounter Up to 9 communication interfaces -Up to 2 x I2C interfaces (SMBus/PMBus) -Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control -Up to 2 SPIs (18 Mbit/s) -CAN interface (2.0B Active) -USB 2.0 full-speed interface CRC calculation unit, 96-bit unique ID Packages are ECOPACK

The STM32F103x4 performance line family incorporates the high-performance ARMCortex-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 32 Kbytes and SRAM up to 6 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN. The devices operate from a 2.0 to 3.6 V power supply. They are available in both the -40 to +85 °C temperature range and the -40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications. The STM32F103x4 low-density performance line family includes devices in different package types. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family. These features make the STM32F103xx low-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs. Key Features ARM32-bit Cortex-M3 CPU Core -72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access -Single-cycle multiplication and hardware division Memories -16 or 32 Kbytes of Flash memory -6 or 10 Kbytes of SRAM Clock, reset and supply management -2.0 to 3.6 V application supply and I/Os -POR, PDR, and programmable voltage detector (PVD) -4-to-16 MHz crystal oscillator -Internal 8 MHz factory-trimmed RC -Internal 40 kHz RC -PLL for CPU clock -32 kHz oscillator for RTC with calibration Low-power -Sleep, Stop and Standby modes -VBAT supply for RTC and backup registers 2 x 12-bit, 1 µs A/D converters (up to 16 channels) -Conversion range: 0 to 3.6 V -Dual-sample and hold capability -Temperature sensor DMA -7-channel DMA controller -Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs Up to 51 fast I/O ports -26/37/51 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant Debug mode -Serial wire debug (SWD) & JTAG interfaces 6 timers -Two 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input -16-bit, motor control PWM timer with dead-time generation and emergency stop -2 watchdog timers (Independent and Window) -SysTick timer 24-bit downcounter 6 communication interfaces -Up to 1 x I2C interfaces (SMBus/PMBus) -2x USARTs (ISO 7816 interface, LIN, IrDA capability, modem control -1x SPIs (18 Mbit/s) -CAN interface (2.0B Active) -USB 2.0 full-speed interface CRC calculation unit, 96-bit unique ID Packages are ECOPACK

The STM32F103xx medium-density performance line family incorporates the high-performance ARMCortex-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN. The devices operate from a 2.0 to 3.6 V power supply. They are available in both the -40 to +85 °C temperature range and the -40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications. The STM32F103xx medium-density performance line family includes devices in six different package types: from 36 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family. These features make the STM32F103xx medium-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs. Key Features ARM32-bit Cortex-M3 CPU Core -72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access -Single-cycle multiplication and hardware division Memories -64 or 128 Kbytes of Flash memory -20 Kbytes of SRAM Clock, reset and supply management -2.0 to 3.6 V application supply and I/Os -POR, PDR, and programmable voltage detector (PVD) -4-to-16 MHz crystal oscillator -Internal 8 MHz factory-trimmed RC -Internal 40 kHz RC -PLL for CPU clock -32 kHz oscillator for RTC with calibration Low-power -Sleep, Stop and Standby modes -VBAT supply for RTC and backup registers 2 x 12-bit, 1 µs A/D converters (up to 16 channels) -Conversion range: 0 to 3.6 V -Dual-sample and hold capability -Temperature sensor DMA -7-channel DMA controller -Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs Up to 80 fast I/O ports -26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant Debug mode -Serial wire debug (SWD) & JTAG interfaces 7 timers -Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input -16-bit, motor control PWM timer with dead-time generation and emergency stop -2 watchdog timers (Independent and Window) -SysTick timer 24-bit downcounter Up to 9 communication interfaces -Up to 2 x I2C interfaces (SMBus/PMBus) -Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control -Up to 2 SPIs (18 Mbit/s) -CAN interface (2.0B Active) -USB 2.0 full-speed interface CRC calculation unit, 96-bit unique ID Packages are ECOPACK

The STM32F103xF and STM32F103xG performance line family incorporates the high-performance ARMCortex-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 1Mbytes and SRAM up to 96 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer 3x12-bit ADCs, ten general purpose 16-bit timers plus 2xPWM timer, as well as standard and advanced communication interfaces: up to 2x I2Cs and 3x SPIs, 2x I2Ss, 1x SDIO, 5x USARTs, an USB and a CAN. The devices operate from a 2.0 to 3.6 V power supply. They are available in both the -40 to +85 °C temperature range and the -40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications. These features make the STM32F103xF/G high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems and video intercom. Key Features ARM32-bit Cortex-M3 CPU Core -72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access -Single-cycle multiplication and hardware division Memories -768 Kbytes to 1 Mbyte of Flash memory -96 Kbytes of SRAM -Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories -LCD parallel interface, 8080/6800 modes Clock, reset and supply management -2.0 to 3.6 V application supply and I/Os -POR, PDR, and programmable voltage detector (PVD) -4-to-16 MHz crystal oscillator -Internal 8 MHz factory-trimmed RC -Internal 40 kHz RC -32 kHz oscillator for RTC with calibration Low-power -Sleep, Stop and Standby modes -VBAT supply for RTC and backup registers 3 x 12-bit, 1 µs A/D converters (up to 21 channels) -Conversion range: 0 to 3.6 V -Tripple-sample and hold capability -Temperature sensor 2 × 12-bit D/A converters DMA -12-channel DMA controller -Peripherals supported: timers, ADC, DAC, SDIO, SPIs, I2Cs and USARTs Up to 112 fast I/O ports -51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant Debug mode -Serial wire debug (SWD) & JTAG interfaces -Cortex -M3 Embedded Trace Macrocell Up to 17 timers -Up to ten 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input -2x16-bit, motor control PWM timer with dead-time generation and emergency stop -2 watchdog timers (Independent and Window) -SysTick timer 24-bit downcounter -2× 16-bit basic timers to drive the DAC Up to 13 communication interfaces -Up to 2 x I2C interfaces (SMBus/PMBus) -Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control -Up to 3 SPIs (18 Mbit/s)2 with I2S interface multiplexed -CAN interface (2.0B Active) -USB 2.0 full-speed interface CRC calculation unit, 96-bit unique ID ECOPACK

Induktionskochfeld mit Power Boost, Re Start und Kindersicherung. Das Bosch PIB375FB1E Induktionskochfeld der Serie 6 ist ein elegantes Domino-Kochfeld mit einem 30 cm breiten Design und einem Rahmen. Es bietet Power Boost für bis zu 35% schnelleres Aufheizen, eine praktische Re Start-Funktion, einen Timer mit Abschaltfunktion und eine Kindersicherung für zusätzliche Sicherheit. Perfekt für modernes Kochen mit Stil und Komfort. Produktdetails: - Kochfeldart: Induktionskochfeld - Gerätebreite: 30 cm - Anzahl der Kochzonen: 2 - Grösse der Kochzonen: 1 x (21,0 cm Ø), 1 x (14,5 cm Ø) - Leistung der Kochzonen: 1 x 1.4 (2.2) kW, 1 x 2.2 (3.7) kW - Hauptoberflächenmaterial: Glaskeramik - Einbaudesign: Designrahmen - Farbe: Schwarz - Energieverbrauch des Kochfelds: 175,0 Wh/kg - Masse: Abmessungen des Gerätes (H x B x T): 51 x 306 x 527 mm - Nischenhöhe minimal/maximal: 51 mm - Nischenbreite minimal/maximal: 270 mm - Nischentiefe: 490 mm - Gerätehöhe über Arbeitsplatte: 6,0 mm Technische Daten: - Anschlusswert: 3.700 W - Spannung: 220-240 V - Länge Anschlusskabel: 110,0 cm - Steckerart: Ohne Stecker (Anschluss durch Elektrofachkraft) Komfort: - Bedienung: DirectSelect Classic - Anzahl der Leistungsstufen: 17 - Art der Kochzonen: Runde Zonen für Standard-Kochgeschirr - PowerBoost: Ja - Quick Start: Ja - Elektronik-Uhr: Ja Sicherheit: - Restwärmeanzeige: Getrennt - Sicherheitsvorrichtungen: Kindersicherung, Power Management Funktion, Sicherheits-Zeitabschaltung, Topferkennung.

FRITZ!Powerline 1240 AX WLAN Set - Gigabit-Powerline und Wi-Fi 6 energiesparend an jeder Steckdose Das FRITZ!Powerline 1240 AX WLAN Set - bestehend aus FRITZ!Powerline 1240 AX und FRITZ!Powerline 1210 - erweitert das Heimnetz einfach und sicher mit Gigabit-Powerline und modernem Wi-Fi 6. Der integrierte Wi-Fi 6 Access Point verbindet per Tastendruck alle mobilen Geräte wie Smartphones, Tablets, Fernseher oder Spielekonsolen mit dem Heimnetz Gigabit-Powerline von bis zu 1.200 MBit/s und die 2 x 2-MIMO-Technologie ermöglichen robuste Verbindungen, große Reichweite und hohe Datendurchsätze für bandbreitenintensive Anwendungen bei gleichzeitig moderatem Energieverbrauch. Das FRITZ!Powerline 1240 AX WLAN Set macht das Heimnetz fit für anspruchsvolle Anwendungen wie Media-Streaming, 4K-Video oder NAS-Anbindung - sogar bis in weit entlegene Räume. Powerline der Gigabit-Klasse Das FRITZ!Powerline 1240 AX WLAN Set verbindet netzwerkfähige Geräte zuverlässig wahlweise über WLAN oder Gigabit-LAN. Die Gigabit-Powerline- Technologie gemäß HomePlug-AV-Standard mit 2 x 2 MIMO ermöglicht robuste Powerline-Verbindungen und erreicht unter Verwendung des MIMO- und Diversity-Verfahrens Übertragungsraten bis zu 1200 MBit/s über die vorhandene Stromleitung. Mit Wi-Fi 6 perfekt für WLAN Mesh FRITZ!Powerline 1240 AX ist perfekt auf das Mesh der FRITZ!Box abgestimmt und bringt die Daten über die Stromleitung mit bis zu 1.200 MBit/s und über Wi-Fi 6 auf 2,4 GHz mit bis zu 600 MBit/s ans Ziel. FRITZ!Powerline 1240 AX kann dank FRITZ!OS und WLAN Mesh einfach per Tastendruck ins Heimnetz integriert werden und spannt zusammen mit anderen FRITZ!-Produkten ein nahtloses WLAN auf. Einstellungen der FRITZ!Box werden automatisch übernommen und dauerhaft synchronisiert. Dazu gehören alle WLAN-Einstellungen wie beispielsweise das ausgewählte WLAN-Funknetz, der Funkkanal, das WLAN- Kennwort und der WLAN-Gastzugang. In Kombination mit Wi-Fi 6 steht ein besonders leistungsstarkes WLAN Mesh mit Top-Performance beim Surfen,Video oder Gaming bereit. Einfach und sicher ab Werk FRITZ!Powerline 1240 AX wird einfach in die Steckdose gesteckt und der im Set mitgelieferte FRITZ!Powerline 1210 wird per LAN-Kabel mit der FRITZ!Box verbunden. Herausragend dabei ist die individuelle Verschlüsselung ab Werk: das FRITZ!Powerline 1240 AX WLAN Set ist mit 128-Bit-AES-Verschlüsselung sofort automatisch sicher in das Heimnetz eingebunden und sofort einsatzbereit. Mit maximaler Sicherheit durch die WPA2-Verschlüsselung, durch die einfache Anbindung von WLAN-Geräten per WPS (Wi-Fi Protected Setup ) sowie das leistungsfähige Wi-Fi 6 bietet das FRITZ!Powerline 1240 AX WLAN Set maximalen Komfort und Flexibilität beim kabellosen Surfen. Energiemanagement bei Powerline, LAN und WLAN Das FRITZ!Powerline 1240 AX WLAN Set kombiniert Powerline, Wi-Fi 6 und LAN-Anschlüsse in einem multifunktionalen energiesparenden Produkt. Ein intelligentes Energiemanagement regelt automatisch die Verbindung über Powerline und verringert damit den Stromverbrauch. Bei moderaten Datenanforderungen greift auch ein Herunterstellen der LAN-Port-Geschwindigkeiten von 1000 auf 100 MBit/s in den Strombedarf der Geräte ein. Im WLAN helfen Green AP, Target Wake Time und die WLAN-Zeitschaltungebenfalls dabei, Strom zu sparen. FRITZ!Powerline 1240 AX WLAN Set auf einen Blick: Vergrößert das Heimnetz über die Stromleitung mit WLAN Mesh Gigabit-Powerline bis zu 1200 MBit/s Wi-Fi 6 (WLAN AX) bis 600 MBit/s (2,4 GHz) Für hohe Ansprüche (z. B. parallele 4K-Streams) in einem Heimnetz mit schnellem Internetanschluss und einer Vielzahl gleichzeitig verwendeter WLAN-Geräten WLAN Mesh: im Zusammenspiel mit einer FRITZ!Box werden mehrere WLAN-Zugangspunkte zu einem einzigen intelligenten WLAN mit optimaler Leistung zusammengefasst Höhere Reichweiten mit 2 x 2-MIMO-Technik und Diversity, standardisiert nach HomePlug AV2 2 x Gigabit-LAN für Anbindung von PC, Smart-TV, Medienzuspieler NAS, Hi-Fi,Spielekonsole Kompatibel zu allen marktübl

* THE PHENOMENAL INTERNATIONAL BESTSELLER - 3 MILLION COPIES SOLD The iconic bestseller Prisoners of Geography, now fully updated with brand new content to reflect the changing global geopolitical landscape since it was first published in 2015 'One of the best books about geopolitics you could imagine.' Evening Standard Prisoners of Geography is the book people need to understand what's happening in the news today, from China's ambitions to the conflicts in Ukraine and the Middle East. Bestselling author and geopolitics expert Tim Marshall looks at the past, present and future to offer crucial insights into one of the major factors that determines world history - because if you don't know geography, you'll never have the full picture. This completely revised and updated edition brings the classic text up to date with the events and trends of the past decade, with new material including: . the Russia-Ukraine war and Moscow's alliances with authoritarian states . the conflicts in the Middle East . China's growing military and strategic power, and its stance on Taiwan . American global power and pivot to the Pacific . Europe's leaning towards more extreme politics, increased defence spending, and the new 'Iron Curtain' . Japan's remilitarisation and increasing power . great power play in Africa . the growth of Indian economic and military strength For a dedicated chapter on the geopolitical importance of Iran and why the Strait of Hormuz makes it a key global player, read The Power of Geography: Ten Maps that Reveal the Future of Our World by Tim Marshall. *Want to test your world knowledge? Challenge friends and family with Prisoners of Geography: The Quiz Book, and discover who is the ultimate armchair explorer! * ** If you are having problems accessing the latest edition of this book, clearing your eReader app's cache and cookies may solve the issue. **

There are several options for this item, this option is PI5-2GB Dual-Camera Kit C , including Raspberry Pi 5 2GB, IMX219-83 Stereo Camera, TF Card 64GB, Power Supply and so on (10 Items). For more details, please click the image2 to check the package content. Raspberry Pi 5 is the latest generation flagship product in the Raspberry Pi series, following the success of the Raspberry Pi 4. It provides a 2-3x increase in CPU performance over the previous generation. Onboard dual CSI/DSI ports and USB connectors which are provided by the Raspberry Pi RP1 I/O controller. And this is the first Raspberry Pi computer using silicon built in-house at Raspberry Pi. 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, 512KB per-core L2 caches and a 2MB shared L3 cache. VideoCore VII GPU @800MHz, supporting OpenGL ES 3.1, Vulkan 1.2. Dual 4Kp60 HDMI display output 4Kp60 HEVC decoder. LPDDR4X-4267 SDRAM. 2.4GHz/5GHz dual-band 802.11ac Wi-Fi. Bluetooth 5.0 / Bluetooth Low Energy (BLE). TF card slot, with support for high-speed SDR104 mode 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation. Gigabit Ethernet, with PoE+ support (requires separate PoE+ HAT). 2 × 4-lane MIPI DSI/CSI port. PCIe 2.0 x1 interface for fast peripherals (requires separate M.2 HAT or other adapter) 5V/5A DC power via USB-C, with Power Delivery support. Raspberry Pi standard 40-pin header. Real-time clock (RTC), powered from external battery (not included). Onboard power button for power on/off without disconnecting power adapter Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios ️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.

There are several options for this item, this option is PI5-2GB Dual-Camera Kit B, including Raspberry Pi 5 2GB, 2pcs PI5-IMX219-120 camera,TF Card 64GB, Power Supply and so on (8 items). For more details, please click the image2 to check the package content. Raspberry Pi 5 is the latest generation flagship product in the Raspberry Pi series, following the success of the Raspberry Pi 4. It provides a 2-3x increase in CPU performance over the previous generation. Onboard dual CSI/DSI ports and USB connectors which are provided by the Raspberry Pi RP1 I/O controller. And this is the first Raspberry Pi computer using silicon built in-house at Raspberry Pi. 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, 512KB per-core L2 caches and a 2MB shared L3 cache. VideoCore VII GPU @800MHz, supporting OpenGL ES 3.1, Vulkan 1.2. Dual 4Kp60 HDMI display output 4Kp60 HEVC decoder. LPDDR4X-4267 SDRAM. 2.4GHz/5GHz dual-band 802.11ac Wi-Fi. Bluetooth 5.0 / Bluetooth Low Energy (BLE). TF card slot, with support for high-speed SDR104 mode 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation. Gigabit Ethernet, with PoE+ support (requires separate PoE+ HAT). 2 × 4-lane MIPI DSI/CSI port. PCIe 2.0 x1 interface for fast peripherals (requires separate M.2 HAT or other adapter) 5V/5A DC power via USB-C, with Power Delivery support. Raspberry Pi standard 40-pin header. Real-time clock (RTC), powered from external battery (not included). Onboard power button for power on/off without disconnecting power adapter Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios ️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.

Three mounting options offer flexible adaptation to various scenarios. Offering three mounting options: freestanding, wall-mounted, and suspended, to meet diverse space requirements: Freestanding: Requires no wall support and can be moved freely, perfect for flexible layouts in large spaces. Wall-mounted: The back bracket leans against the wall for easy installation and enhanced stability. Suspended: Secures to the ceiling using a cable or bracket, saving floor space. Each mounting option comes with dedicated accessories, allowing users to flexibly choose the installation based on their room layout and usage habits, easily achieving a customized installation. Using explosion-proof Using explosion-proof glass design, even if not accidentally broken will not splash at will, to protect your safety. Flexible power connection options and concealed wiring ensure safety and neatness. Two wiring options are available: 1. Pre-wired connection to the driver power supply (suitable for pre-installed wiring during renovations) 2. Direct connection to a wall outlet (the outlet must be located outside the mirror). A 1.5-meter power cord is included as standard, and the driver is housed in a waterproof box. All wiring is concealed on the back. This eliminates cluttered cables and ensures both aesthetics and electrical safety. Strong anti-oxidation performance, corrosion resistance is not easy to blacken Tested, in five percent concentration of hydrochloric acid, more than 95 hours to react (ordinary copper-free silver mirror less than 30 hours to react) antioxidant performance than the traditional copper-free silver mirror to enhance the three times, is the ordinary silver mirror 9 times, aluminium mirrors 27 times, the mirror surface is more translucent. Multi-layer protection, more durable.

Anwendung: Each cruise control cable has a different color. Das Display-Panel für Elektrobikes ist einfach zu installieren. Perfektes Zubehör für Elektrobikes etc. : Dieser elektrische Fahrrad-Controller ist aus hochwertigen Materialien hergestellt, mit feiner Kraftsmanship, Guaranteeing good hardness und Wasserbeständigkeit. Bietet besseren Schutz für die interne Schaltung und macht es langlebiger. Praktisch: Mit dem elektrischen Fahrradspeed-Controller, können Sie die Basic-Station des Elektrofahrrads in der Geschwindigkeit des Drehzahls, Gear, Power, Modus, Lampe usw. problemlos sehen. Functional: The display of the motor controller supports 3 backlight levels, are settings such as automatic idle mode or timer mode, speed limit and more, very practical and easy to use. Standardspezifikation: Der Motor Controller ist manufactured to the original production specifications, in line with strict quality standards, and are in use.

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/Zero WH I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time Multi batt protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable Onboard 5 V regulator, up to 2.5 A continuous output current. 5 V USB output, convenient for powering other boards batt warning indicators, easy to check if the batt is connected correctly. Comes with development resources and manual (English language not guaranteed)

Catch Up Maths & Stats covers the core maths skills you will need on any life or medical sciences course including: working with fractions and powers preparation of a dilution series how to calculate standard deviation using and understanding graphs analysing enzyme kinetics choosing the right statistical test Over 200 examples are provided to show the relevance and application of maths and stats to your course. This second edition also now provides further coverage of differentiation and integration alongside nearly 70 more questions and answers to help you test your understanding. Catch Up Maths & Statswill bring you up to speed in the shortest possible time, even if you didn't study maths at advanced level.

A #1 INTERNATIONAL BESTSELLER 'Bernhard Schlink speaks straight to the heart' New York Times 'Brilliant... A tale of love and loss in 20th century Germany' Evening Standard 'A cleverly-constructed tale of cross-class romance' Mail on Sunday 'A poignant portrait of a woman out of step with her time' Observer Olga is an orphan raised by her grandmother in a Prussian village around the turn of the 20th century. Smart and precocious, she fights against the prejudices of the time to find her place in a world that sees her as second-best. When she falls in love with Herbert, a local aristocrat obsessed with the era's dreams of power, glory and greatness, her life is irremediably changed. Theirs is a love against all odds, entwined with the twisting paths of German history, leading us from the late 19th to the early 21st century, from Germany to Africa and the Arctic, from the Baltic Sea to the German south-west. This is the story of that love, of Olga's devotion to a restless man - told in thought, letters and in a fateful moment of great rebellion.